Search found 10 matches

Go to advanced search

by ErwinTuijtel
Fri Feb 24, 2017 6:39 am
Forum: Gallery
Topic: First test results and learnings along the way
Replies: 1
Views: 1757

First test results and learnings along the way

So after a hick up https://www.picengrave.com/forum/viewtopic.php?f=14&t=263&start=20 I started really using the software picengraver pro 5 with picsender. After reading the documentation most of the basic settings where easaly made. I only have to get use to switching between laser and spin...
by ErwinTuijtel
Fri Feb 24, 2017 5:52 am
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

Re: X Carve with laser and Picengraver - only black results

With this message I want to close this topic. I have recived a new board of inventables. Installed is. Loaded the new hex file with Hexloader and it worked directly. So problem solved.

In a new topic I want to show my first few test and I am very interesting in your opinion.
by ErwinTuijtel
Tue Feb 07, 2017 3:30 am
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

Re: X Carve with laser and Picengraver - only black results

Thank you for your comment. I have tried also on different PC/laptops with windows. All have the same problem. After some mail back and forward, Inventables addressed it as a corrupt boot loader. So the board needs te be exchanged. This morning I send a mail to Robosavvy. Hopefully they act as fast ...
by ErwinTuijtel
Mon Feb 06, 2017 2:39 pm
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

Re: X Carve with laser and Picengraver - only black results

I have installed the latest set of software. When I do the upload step by step discribes by inventables it still won't upload. This is the message I get. I have asked Inventables to look into it. I hope they can help. Arduino: 1.8.1 (Mac OS X), Board:"Arduino/Genuino Uno" In file included ...
by ErwinTuijtel
Sun Feb 05, 2017 6:40 am
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

Re: X Carve with laser and Picengraver - only black results

Indeed I use a X-Controller. I have read the instructions John gave. The only thing I cannot reproduce on my windows 10 machine is the driver. When I plug-in my X-Controller it inmideately detects the port and sets it as a USB Serial Port (COM3). When I manually want to overwrite the drivers for the...
by ErwinTuijtel
Sun Feb 05, 2017 3:23 am
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

Re: X Carve with laser and Picengraver - only black results

I have double checked the unpakking of the HEX and this was okay. Just to be sure I downloaded it again and unpacked it. I also checked it the port was open. Xloader also gives a message if the port was close. I restarted the X-Controller and it is open. The programm really freezes when it status is...
by ErwinTuijtel
Fri Feb 03, 2017 4:09 am
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

Re: X Carve with laser and Picengraver - only black results

Yes I did. I have set it on the same settings wich I use normally when I controll my Xcarve.
by ErwinTuijtel
Thu Feb 02, 2017 9:59 am
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

Re: X Carve with laser and Picengraver - only black results

Ok. I am trying to install the HEX. However I do not succeed. I have tried it via my windows machine with Xloader and via IOS with HEXLoader. The XLoader does nothing (still updating after 25 min) and in HexLoader I get the following error. avrdude: stk500_recv(): programmer is not responding avrdud...
by ErwinTuijtel
Thu Feb 02, 2017 7:19 am
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

Re: X Carve with laser and Picengraver - only black results

Thank you for your quick reply. I didn't use this version of GRBL because the 1.0 c version was allready on the x-controller when I purchased it via a company in the UK. Is the version you talk about a diffrent one?
by ErwinTuijtel
Thu Feb 02, 2017 3:54 am
Forum: CNC Controller Discussions
Topic: X Carve with laser and Picengraver - only black results
Replies: 21
Views: 10801

X Carve with laser and Picengraver - only black results

Dear fellow Engravers, This week I bought the PicEngraver Pro 5 and Picsender software and used it in combination with my X-Carve and J-Tech 2.8W laser. I allready had some great results using Inkscape and the laser. However with the PicEngrave software I cann't get it to the right settings. I proba...

Go to advanced search

cron