Search found 24 matches

Go to advanced search

by Mukka_Meck
Sun Mar 17, 2019 11:46 am
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

I am working on rebuilding the entire machine for now. The new system will have arduino, mach3, mach4, uccnc and everything will be able to run through pic convert if i want. want to be able to experiment. The new controlled pwm rotation recorder will soon be fully developed and will be integrated i...
by Mukka_Meck
Wed Jan 23, 2019 6:04 pm
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

woooow that was fine! Congratulations! I intend to try arduino, but first make it work with mack3 as I want everything on the same control system. Today my machine can handle 1800x1300 mm and the one I carry on and designs can handle 1500x3000 and also want it as an engraving surface. The new machin...
by Mukka_Meck
Wed Jan 23, 2019 1:47 pm
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

Reinstalled picengrave so now it works, seems like the profiles were not loaded as they should. There were strange engravings with uccnc and pic engrave. Uccnc's own engraving program was tricky and adjustable, felt stiff. Now run the UC300, mach3 with picconvert and work just as well. Engraved my s...
by Mukka_Meck
Thu Jan 03, 2019 10:56 am
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

Now I have adjusted the laser driver and it works better.

However, I have problems with piengeave. When I use 3D laser / 45 degree diagonal the machine dwall in the corners?
by Mukka_Meck
Tue Jan 01, 2019 7:39 pm
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

Sorry I meant khz. Yes I have tried everything. I have tried laser plug in. Strange results. The laser gives full power already at the M10 Q40 .... Then it can't get good engraving, just get black. Wonder if it is wrong on my laser driver black buck M8. Has an industrial laser with glass lens now at...
by Mukka_Meck
Tue Jan 01, 2019 6:40 pm
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

You can set motion board UC300 at 25-50-100-200-400 Hz and I have seen a connection with something with the frequency setting it at the engraving. 400 HZ, the dac loses its position at once. I'll research more about why it is so. I have tried to run the UC300 with dac but it was worse than mach3. I ...
by Mukka_Meck
Tue Jan 01, 2019 2:23 pm
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

Now I have bought uccnc and tried with the dac and without it noticed that the dac does not handle 400 hz mode. Tried to use the uccnc M10 Qxx code and mark a strange thing, already at the M10 Q40 the laser gives full effect 1A and equal to M10 Q255. Wondering what's wrong?
by Mukka_Meck
Wed Nov 28, 2018 3:27 pm
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

okay are you getting good engravings?
by Mukka_Meck
Wed Nov 28, 2018 6:50 am
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

not yet .... My nubm44 laser stopped working .... I have ordered a more expensive 2.5W laser from China tested and of industry quality and a digital power / volt panel to be able to set max power / volt on output . Things should come a week. I start to think that most usb / ethernet motion boards pa...
by Mukka_Meck
Mon Nov 05, 2018 5:30 pm
Forum: CNC Controller Discussions
Topic: some help please
Replies: 46
Views: 9815

Re: some help please

Acceleration X-Y=1175/A=1115, us=0-0, laser power=11.8 vdc/3a, laser spoot=0.19, FRC on 50%, start burn scale=170, horizontal engrave.

Go to advanced search