Undifined Feedrate error 22

Topic's about PicSender
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
dmjohn
Posts: 5
Joined: Wed Jan 31, 2018 9:14 am

Undifined Feedrate error 22

Postby dmjohn » Wed Jan 31, 2018 7:07 pm

I Just got my Xcarve 1000 up and running. I am trying to use picsender to send gcode. I'm using Vcarve pro and saving as xcarve grbl. when I hit send the x and y axis move to project and then error 22 comes up.
picsender error 1.jpg
picsender error 1.jpg (184.28 KiB) Viewed 2688 times
. I found this in the help PDF is this the problem I am having?
picsender feedrate help.jpg
picsender feedrate help.jpg (248.35 KiB) Viewed 2688 times
Thanks.

User avatar
Picengravertoo
Full Access Moderator
Posts: 1092
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: Undifined Feedrate error 22

Postby Picengravertoo » Wed Jan 31, 2018 7:30 pm

Look at the 6th line down in your gcode file. The Feedrate is F0.0 which you must not have set a feedrate for the cutting tool's Z axis plunge linear move before you generated the gcode in Vcarve.

If you select the yellow GRBL button in PicSender, then the View button at the bottom of the page for the grbl Error Codes. Look at #22 in the list.

Jeff

dmjohn
Posts: 5
Joined: Wed Jan 31, 2018 9:14 am

Re: Undifined Feedrate error 22

Postby dmjohn » Wed Jan 31, 2018 7:50 pm

I'm using spindle for carving not a laser does that matter. I set my feed rate in vcarve when I generated my toolpath in the tool option.

User avatar
Picengravertoo
Full Access Moderator
Posts: 1092
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: Undifined Feedrate error 22

Postby Picengravertoo » Wed Jan 31, 2018 7:56 pm

Sorry, I meant the cutting tool. I was in the middle of another product support with a laser user when I responded here. ;-D

dmjohn
Posts: 5
Joined: Wed Jan 31, 2018 9:14 am

Re: Undifined Feedrate error 22

Postby dmjohn » Thu Feb 01, 2018 7:00 pm

fixed, it was the endmill file I was using..Thanks


Return to “PicSender”

Who is online

Users browsing this forum: No registered users and 1 guest

cron