Page 1 of 1

Automatic switching ??

Posted: Tue Mar 06, 2018 2:19 pm
by tomf8074
Hi Everyone,
When I first start Picsender I get a window stateing as follows:

Multi-Mode GRBL v1.1 detected
NOTICE: Automatic switching of settings is disabled,
Open GRBL screen to enable and setup this feature.

Needless to say I have no Idea what it is wanting me to do, or how to do it :roll:
Grateful for any help,

Re: Automatic switching ??

Posted: Tue Mar 06, 2018 3:49 pm
by Picengravertoo
PicSender lets you setup two different grbl settings for Spindle or Laser use and will load the settings automaticly when switching modes. In the GRBL menu, select which mode you are using (Spindle or Laser) and then select the GRBL Settings button. In the left edit window, confirm or change your settings, then select Send and then select Save. Save those settings to either the spindle.txt or laser.txt file. Select the other mode and do the same thing.

After your grbl settings are setup properly and there saved for the two different modes, select the Auto Settings. With it selected, when you change to Spindle or Laser mode, PicSender will automaticly change the grbl settings for you.