I built this machine a couple years ago from scratch. It had a router then a spindle on it, which I can easily remove the laser and attach the spindle with just 4 screws. Still working on the aesthetics. The lead screws are 5 start direct drive off the Nema 23 motors. Y axis has 2 motors.
Now we have the J-Tech 2.8W Laser and 2.5W Driver along with the Pic-Convert board.
- My setup!!
- Screen Shot 2016-12-11 at 10.41.36 AM.jpg (125.88 KiB) Viewed 3743 times