Issue with my setup, and I have no idea what is going on.

Mach3, grbl, ect.
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
antbarney
Posts: 8
Joined: Tue Mar 01, 2016 10:38 pm

Re: Issue with my setup, and I have no idea what is going on.

Postby antbarney » Thu Mar 03, 2016 10:12 am

At first I thought they needed to be different, well measuring movement with a dial gauge but that looks to have been due to my issues with the x-axis. I have them set the same now. And I was planning on doing most of my stuff with 45 but was having issues which now looks to be my own fault with a faulty setup on the X axis.

Again thanks so much for the Ideas on what to check!

antbarney
Posts: 8
Joined: Tue Mar 01, 2016 10:38 pm

Re: Issue with my setup, and I have no idea what is going on.

Postby antbarney » Thu Mar 03, 2016 12:17 pm

And I must have lowered my Accel's and forgot to reset well trying to get it working as I was using 12000 for most of the tests. :D

antbarney
Posts: 8
Joined: Tue Mar 01, 2016 10:38 pm

Re: Issue with my setup, and I have no idea what is going on.

Postby antbarney » Fri Mar 04, 2016 5:58 pm

Thanks again so much, Redid my X Axis got it running nice and smooth without any backlash, Got my steppers setup to 1/16 and got the 6w back on there and am finally getting some good prints. Thanks again so much for the help with Diagnosing my noobish issues :D

Image

User avatar
Picengravertoo
Full Access Moderator
Posts: 1069
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: Issue with my setup, and I have no idea what is going on.

Postby Picengravertoo » Fri Mar 04, 2016 7:31 pm

Looks much better. Thanks for posting your issue and resolve as it will help others that may have the same issue you had.

User avatar
Picengraver
Full Access Moderator
Posts: 270
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: Issue with my setup, and I have no idea what is going on.

Postby Picengraver » Fri Mar 04, 2016 9:24 pm

Nicely done. Glad you got it working. Please keep posting.
John


Return to “CNC Controller Discussions”

Who is online

Users browsing this forum: No registered users and 5 guests