Piclaser problem

Spindles & Lasers.
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
skeepy74
Posts: 3
Joined: Sat Mar 17, 2018 11:37 am

Piclaser problem

Postby skeepy74 » Sat Mar 17, 2018 12:55 pm

Hi everyone !
I had create my Mpcnc with Rambo 1.3 and this laser : https://www.amazon.fr/dp/B075NM7VCG/ref ... TE_3p_dp_1
I can use repetier,inkscape, but I had a big problem with piclaser: that's make a twice engrave
I show you my problem in photo... anyone can help me please ? it's not from the calibration X and Y, I had the same problem if I said print -45° or horizontal or vertical...
My command for laser is M42 S...
Attachments
bonbonbon.bmp
bonbonbon.bmp (439.51 KiB) Viewed 2703 times
panda.png
panda.png (342.06 KiB) Viewed 2703 times

User avatar
Picengravertoo
Full Access Moderator
Posts: 1070
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: Piclaser problem

Postby Picengravertoo » Sat Mar 17, 2018 1:12 pm

Hi Leo,

The problem is the 3D printer firmware your using. Here are many other users having the same Ghosting problem as you are.

search.php?keywords=ghosting

Jeff

skeepy74
Posts: 3
Joined: Sat Mar 17, 2018 11:37 am

Re: Piclaser problem

Postby skeepy74 » Sat Mar 17, 2018 1:25 pm

I use Marlin for Mpcnc,what I had to do ? (sorry if my english is not better i'm french...)

User avatar
Picengravertoo
Full Access Moderator
Posts: 1070
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: Piclaser problem

Postby Picengravertoo » Sat Mar 17, 2018 1:37 pm

Try this firmware.

https://github.com/flashsolutions/build ... ter-marlin

It's from our other PicLaser customer that started this thread.

viewtopic.php?f=8&t=208

skeepy74
Posts: 3
Joined: Sat Mar 17, 2018 11:37 am

Re: Piclaser problem

Postby skeepy74 » Sat Mar 17, 2018 3:54 pm

thank you Picengravertoo !! I had download your firmware and send to my mpcnc (rambo ) but it's not working... my screen of my rambo goes locked ( do nnnnnnnnnnnnnnnnnn in screen ) and no control with repetier... I normaly use MPCNC813FullRAmbo_GLCD_T8 to work, and I don't understand how to add your firmware inside correctly...i'm sorry i'm begginer and i really need your help...

User avatar
Picengravertoo
Full Access Moderator
Posts: 1070
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: Piclaser problem

Postby Picengravertoo » Sat Mar 17, 2018 4:29 pm

We do not have any 3D printer controllers here to test with and I only suggested you try that firmware after I did a search for what the other PicLaser user had done with his mpcnc.

Jay at J-Tech Photonics is the 3D printer controller expert, so search on his web site for what firmware to use. https://jtechphotonics.com/

The grbl HEX downloads on our forum's main page is for an Arduino UNO or NANO running grbl.


Return to “Hardware Discussions”

Who is online

Users browsing this forum: No registered users and 1 guest

cron