Memorial

Show us what you have made with our Pic Software.
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
User avatar
Honk
Posts: 324
Joined: Thu Dec 25, 2014 9:46 am
Contact:

Memorial

Postby Honk » Sun Dec 27, 2015 9:54 am

puma.jpg
puma.jpg (133.62 KiB) Viewed 3134 times

I am having a problem with my Z axis moving to slow. leaving dark lines on areas of large moves.(around paws) faster and I skip lines, I need to find the sweet spot but it's tough. this is 21 x 22 Poplar, .007 Pixel Resolution, 56 IPM, 25%, Horizontal
Thanks
Jerry

User avatar
Picengravertoo
Full Access Moderator
Posts: 1091
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: Memorial

Postby Picengravertoo » Sun Dec 27, 2015 11:57 am

Hi Jerry,

Very nice. :cool)

Have you tried reducing your Max depth of cut some so the large z axis moves are less?

Jeff

User avatar
Picengraver
Full Access Moderator
Posts: 312
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: Memorial

Postby Picengraver » Mon Dec 28, 2015 7:52 am

Well done, Jerry.

Have you tried increasing your Z acceleration setting some?

HNY,
John

User avatar
Picengravertoo
Full Access Moderator
Posts: 1091
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: Memorial

Postby Picengravertoo » Mon Dec 28, 2015 8:30 am

John,

It's about time you changed your Avatar. ;-D

Jeff

User avatar
Honk
Posts: 324
Joined: Thu Dec 25, 2014 9:46 am
Contact:

Re: Memorial

Postby Honk » Mon Dec 28, 2015 9:20 am

Hi All
I need to take the time to see where I should set all the Axis. The stepper drivers all new (the ones Jeff suggested) and they are an improvement from the old ones. I need to find out where the Acceleration and Velocity should be set. I re-set them and if it loses steps (a few hours later) I just set it back where they were and get lazy. I know, DUMB!!
I Can play with the Max Depth a little (and will) as I am usually around 5/8 in. in depth and have about 1/4 in. in focus so there is room to try.
Thanks for the help
Jerry


Return to “Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest

cron