Page 1 of 1

PicEngrave Pro 5 Spindle Engraving

Posted: Tue Apr 05, 2016 10:47 am
by Picengraver
Spindle engraved in bass wood.
3.8 in.w x 5.0 in. h
Max. Depth - .035 inches
PicEngrave Pro 5
1/8 in. dia./30° V bit
PR - .007 inches
Engraving Angle - Horiz 2x
Shapeoko 2 - DeWalt DWP611 spindle
About 1 hour 15 min to carve.

Finish was experimental, and not as good as I had hoped. Final sealing with spray shellac.
Hard to photograph, so please excuse the "sparkle" effect from flash.
John