PicEngrave Pro Spindle Image Engraving Gallery

Gallery for us experts.
Forum rules
Gallery only for the owner's of picengrave dot com.
Rules? We Don't Need Any Stinking Rules!!
User avatar
Picengravertoo
Full Access Moderator
Posts: 1091
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

PicEngrave Pro Spindle Image Engraving Gallery

Postby Picengravertoo » Sat Sep 30, 2017 10:26 am

This was done with the Dot Pix Spindle engraving profile In our newly released PicEngrave Pro 6. A .05" Pixel Resolution, Z-.035" Max depth, Negative Colors selected and a 60D V-bit was used on a 12" X 12" X .236" sheet of translucent white Acrylic spray painted black. The original image was edited to black around the border area, so it was ignored when generating the gcode to cut down on the overall plunge drilling run time.

DPS.JPG
DPS.JPG (512.71 KiB) Viewed 1812 times

This one is 11.25" X 11.25" in size and took 4 hours and 22 minutes to complete. We used a -.032" Max depth on this one instead. Here is the 60D V-bit I am using. https://tinyurl.com/y8krp72m The travel feedrate was set at 100 IPM and plunge at 7 IPM.
MM1.jpg
MM1.jpg (489.31 KiB) Viewed 1726 times
PW.jpg
PW.jpg (697.17 KiB) Viewed 1535 times

Return to “Administrator's Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest

cron