PicSender & MultiMode grbl 1.0c

Show us what you have made with our Pic Software.
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
User avatar
Picengravertoo
Full Access Moderator
Posts: 1091
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

PicSender & MultiMode grbl 1.0c

Postby Picengravertoo » Wed Oct 19, 2016 9:42 am

Laser engraved on 12"X12"X.125" piece of Birch Ply with our 6W Shapeoko 2 using Larry's MultiMode grbl 1.0c that can be downloaded from here..

https://discuss.inventables.com/t/xcarv ... -fix/28943

The 1,237,164 lines of gcode was generated with PicEngrave Pro 5 and streamed with PicSender. After the engraving was finished, I used the Manual Move menu in PicSender to cut it out with the laser.

plane.jpg
plane.jpg (469.54 KiB) Viewed 2913 times

User avatar
Picengraver
Full Access Moderator
Posts: 312
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: PicSender & MultiMode grbl 1.0c

Postby Picengraver » Thu Oct 20, 2016 8:45 pm

One of your best efforts to date.

User avatar
Picengravertoo
Full Access Moderator
Posts: 1091
Joined: Thu Dec 18, 2014 4:02 pm
Contact:

Re: PicSender & MultiMode grbl 1.0c

Postby Picengravertoo » Fri Oct 21, 2016 10:34 am

Thanks John. None of this would be possible without you.


Return to “Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest

cron