ERROR 1

Mach3, grbl, ect.
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
Marcelo
Posts: 2
Joined: Mon Aug 29, 2016 6:45 pm

ERROR 1

Postby Marcelo » Mon May 20, 2019 12:55 pm

Dear Friends:

I request your help. I am trying to do a job and it has been very difficult for me because I am out of practice. First of all. I tell you I am using PICEngrave Pro 5.The version of GRBL used is 1.1f by Sonny Jeon. The problem occurs when I start to run the program. Notify Error 1. Expected command letter. I really do not know what I can be doing wrong. I have reviewed quite a lot the way to proceed with the programming and I do not know what I can be doing wrong. I hope you can help me.

This is the code and accuses error on line 5:

G21
F2500
G01 S.0000
F1000.0
G01 X0 Y0 ***** Apparently the problem is here *******
M03
G01 S10
G01 X 1.99 Y0
G01 X 1.99 Y1.65
G01 X 0 Y1.65
G01 X 0 Y0
G01 S0.0000
G01 X 0 Y0
G01 X 0.01 Y0.01
G01 S10
G01 X 1.98 Y0.01
G01 X 1.98 Y1.64
G01 X 0.01 Y1.64
G01 X 0.01 Y0.01
G01 S0.0000
G01 X 0.01 Y0.01
Attachments
Error 1 Screen Shoot.jpg
Error 1 Screen Shoot.jpg (323.39 KiB) Viewed 177 times

User avatar
Picengraver
Full Access Moderator
Posts: 302
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: ERROR 1

Postby Picengraver » Mon May 20, 2019 4:49 pm

Email sent earlier. Please advise if you do not get it.
For other members, the issue is the third line down in the gcode file, where it says "(Image File . . .)". There is a second set of parens - "( )" - in the line, and grbl will not accept that.
John

Marcelo
Posts: 2
Joined: Mon Aug 29, 2016 6:45 pm

Re: ERROR 1

Postby Marcelo » Mon May 20, 2019 7:53 pm

Thank you very much John God bless you. As always you are very kind.

User avatar
Picengraver
Full Access Moderator
Posts: 302
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: ERROR 1

Postby Picengraver » Mon May 20, 2019 10:19 pm

Thank you Marcelo. And as well, may our God bless you and your family, too, and bring peace and comfort to all.


Return to “CNC Controller Discussions”

Who is online

Users browsing this forum: No registered users and 1 guest

cron