Picsender and Triquetra 3 Axis

Mach3, grbl, ect.
Forum rules
Be Kind to other's.
No Cussing or Swearing.
Don't post anything Illegal or Obscene.
Image attachment size limit is 500 KiB.
davet354tfd
Posts: 8
Joined: Thu Aug 01, 2019 5:34 pm

Picsender and Triquetra 3 Axis

Postby davet354tfd » Sun Mar 22, 2020 7:53 am

Been looking a the Triquetra 3 Axis Zero plate.
Been through all the videos I could find.
As of right now I have not been able to find one that talks about using it with Picsender.

I am using V-Carve Desktop with Picsender. Very comfortable with that.

Some of the videos talked about a Macro that you put on you computer.
Launch that before Easel then load Easel. and follow the screen prompts.

Is this how it would work with Picsender? or is there something different that I would need to do?

Just trying to get as much info on this before I consider getting one.

Thanks

Bob

User avatar
Picengraver
Full Access Moderator
Posts: 338
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: Picsender and Triquetra 3 Axis

Postby Picengraver » Sun Mar 22, 2020 8:46 am

Bob,
I use one of the first Triquetra plates with PicSender, with the Triquetra code loaded into the Quick Codes feature of PicSender. I also use it with the Probe feature of PicSender to probe one axis at a time.

More info on these features can be found in the Tutorial. (click Help >>> click Tutorial)
John
QCode1.jpg
QCode1.jpg (232.03 KiB) Viewed 1928 times

Probe1.jpg
Probe1.jpg (136.97 KiB) Viewed 1928 times

davet354tfd
Posts: 8
Joined: Thu Aug 01, 2019 5:34 pm

Re: Picsender and Triquetra 3 Axis

Postby davet354tfd » Sun Mar 22, 2020 10:00 am

John:

Thanks for the quick reply.

Help > Tutorials in Picsender?

Can you give me a basic (not detailed) steps that I will go through to accomplish this?

Bob

User avatar
Picengraver
Full Access Moderator
Posts: 338
Joined: Tue Dec 23, 2014 5:40 pm
Contact:

Re: Picsender and Triquetra 3 Axis

Postby Picengraver » Sun Mar 22, 2020 11:55 am

Bob,
At the bottom of the main PicSender screen is a HELP button. Click it, then click on the Tutorials button in the popup Help page.
PS Help1.jpg
PS Help1.jpg (3.62 KiB) Viewed 1920 times


Return to “CNC Controller Discussions”

Who is online

Users browsing this forum: No registered users and 4 guests

cron